 |
 |
 |
|
Tools
- Butane soldering iron (filled up)
- USB Battery pack (charged)
- Headlamp (charged)
- USB C cable with AC adapter
- (2) 4 way extension code splitter
- MC4 Crimpers (used for MC4 plus standard)
- Wire cutters
- Voltmeter
- Scissors
- Nail scissors for heat shrink
- Large Philips screwdriver
- Small Philips screwdriver
- Folding razer blade
- Adjustable wrench
- 7/16” box wrench
- 10mm box wrench
- 5/32 Allen wrench
- 9/16” Deep wall socket
- Permanent Marker
- Blue Tape
- Filament Tape
- Foaming soap for finding holes
- Small scotch pad
- ProNav hard cal jig (1.25 x 3.25 x 11/32)
- (2) Shipping label pouches
Parts - Solder 24”
- HH-66 4oz (includes brush)
- CorrosionX
- MEK pouch
- VLP glue for repairing topside
- PVC valve wrench
- PVC patches in [ ]Orange, [ ]Green, [ ]Yellow, [ ]Blue, [ ]Grey, [ ]Light Blue
- Electronics kit (includes all parts needed to make a Pelican box)
- Motor kit (includes all parts need to make a motor)
- Minn Kota control board (optional)
- ProNav Upper and Lower running 1.4.2.8 (optional)
- Nexus 5X running BHZ32C
- Fuse
- Minn Kota stainless prop nut
- Topside attachment pin assembly
- (2) Minn Kota prop shear pin
- (2) Cheekport with screw, rubber washer, and nut
- (2) Starport
- (4) Motor head screw
- (4) Spade connector
- (4) Sets of buckles short webbing for attaching topside
- (5) Small zip tie
- (2) Long zip tie
- (2) Rivnut
- (2) 3/8” Shrink wrap (or 1 long piece)
|
|
|
 |
|
 |
|